E.10 The Cycle 23 Calibration Plan

The Cycle 23 calibration plan was executed from November 2015 through October 2016.

The calibration programs comprising this plan are listed in Table E.11. The proposals and observation dates can be viewed by entering the Proposal ID into the HST Program Information webpage.

The Cycle 23 calibration plan was designed to:

maintain and update the standard reference files (biases, darks, linearity, CTE traps, UVIS anomalous QE pixels, post-flash)
monitor the health of the instrument (throughput, gain, hysteresis, bad/hot pixels, wavelength and flux stability of grisms; filter transmission, number of IR blobs, CTE decline, stability of the post-flash LED, state of the CSM)
improve astrometric precision (in narrow and medium band filters, and with spatial scan)
improve the characterization of persistence in IR observations

The results of these calibration programs will be documented in Instrument Science Reports on the WFC3 website at:
http://www.stsci.edu/hst/instrumentation/wfc3/documentation/instrument-science-reports-isrs

Table E.11: Cycle 23 Calibration Programs

Proposal ID	Title
14366	UVIS Anneal
14367	UVIS Bowtie Monitor
14368	UVIS Daily Monitor A
14369	UVIS Daily Monitor B
14370	UVIS Daily Monitor C
14371	UVIS Unflashed Monitor
14372	UVIS Post-Flash Monitor
14373	UVIS CCD Gain Stability
14374	IR Dark Monitor
14375	IR Linearity Monitor
14376	IR Gain Monitor
14377	UVIS CTI Monitor (EPER)
14378	UVIS CTE Monitor (Star cluster)
14379	UVIS Traps with CI
14380	IR Persistence: Amplitude Variations
14381	IR Persistence: Improve the Position Dependent Model
14382	UVIS Contamination and Stability Monitor
14383	UVIS Shutter Characterization
14384	UVIS & IR Photometry Zero Points
14385	IR Grisms: Wavelength Calibration
14386	IR Grisms: Trace and Flux Calibration
14387	UVIS Grism Wavelength Calibration Stability
14388	-1st Order Grism Calibration in IR Grisms
14389	UVIS Pixel Variations Via Int-flat Monitor
14390	UVIS Internal Flats
14391	IR Internal Flats
14392	CSM monitor Earth Flats
14393	Astrometric Calibration of All Remaining UVIS Filters
14394	Time Dependence of X-CTE & Astrometry

«Previous Next»

WFC3 Instrument Handbook
- • Acknowledgments
- Chapter 1: Introduction to WFC3
  - • 1.1 New for Cycle 33
  - • 1.2. Overview
  - • 1.3 Key Features of WFC3
  - • 1.4 WFC3 Quick Reference Guide
  - • 1.5 Special Considerations for Cycle 33
  - • 1.6 Sources of Further Information
  - • 1.7 The WFC3 Instrument Team at STScI
- Chapter 2: WFC3 Instrument Description
- Chapter 3: Choosing the Optimum HST Instrument
- Chapter 4: Designing a Phase I WFC3 Proposal
  - • 4.1 Phase I and Phase II Proposals
  - • 4.2 Preparing a Phase I Proposal
- Chapter 5: WFC3 Detector Characteristics and Performance
- Chapter 6: UVIS Imaging with WFC3
  - • 6.1 WFC3 UVIS Imaging
  - • 6.2 Specifying a UVIS Observation
  - • 6.3 UVIS Channel Characteristics
  - • 6.4 UVIS Field Geometry
  - • 6.5 UVIS Spectral Elements
  - • 6.6 UVIS Optical Performance
  - • 6.7 UVIS Exposure and Readout
  - • 6.8 UVIS Sensitivity
  - • 6.9 Charge Transfer Efficiency
  - • 6.10 Other Considerations for UVIS Imaging
  - • 6.11 UVIS Observing Strategies
- Chapter 7: IR Imaging with WFC3
  - • 7.1 WFC3 IR Imaging
  - • 7.2 Specifying an IR Observation
  - • 7.3 IR Channel Characteristics
  - • 7.4 IR Field Geometry
  - • 7.5 IR Spectral Elements
  - • 7.6 IR Optical Performance
  - • 7.7 IR Exposure and Readout
  - • 7.8 IR Sensitivity
  - • 7.9 Other Considerations for IR Imaging
  - • 7.10 IR Observing Strategies
- Chapter 8: Slitless Spectroscopy with WFC3
- Chapter 9: WFC3 Exposure-Time Calculation
  - • 9.1 Overview
  - • 9.2 The WFC3 Exposure Time Calculator - ETC
  - • 9.3 Calculating Sensitivities from Tabulated Data
  - • 9.4 Count Rates: Imaging
  - • 9.5 Count Rates: Slitless Spectroscopy
  - • 9.6 Estimating Exposure Times
  - • 9.7 Sky Background
  - • 9.8 Interstellar Extinction
  - • 9.9 Exposure-Time Calculation Examples
- Chapter 10: Overheads and Orbit Time Determinations
  - • 10.1 Overview
  - • 10.2 Observatory Overheads
  - • 10.3 Instrument Overheads
  - • 10.4 Orbit Use Examples
- Appendix A: WFC3 Filter Throughputs
  - • A.1 Introduction
  - A.2 Throughputs and Signal-to-Noise Ratio Data
    - • UVIS F200LP
    - • UVIS F218W
    - • UVIS F225W
    - • UVIS F275W
    - • UVIS F280N
    - • UVIS F300X
    - • UVIS F336W
    - • UVIS F343N
    - • UVIS F350LP
    - • UVIS F373N
    - • UVIS F390M
    - • UVIS F390W
    - • UVIS F395N
    - • UVIS F410M
    - • UVIS F438W
    - • UVIS F467M
    - • UVIS F469N
    - • UVIS F475W
    - • UVIS F475X
    - • UVIS F487N
    - • UVIS F502N
    - • UVIS F547M
    - • UVIS F555W
    - • UVIS F600LP
    - • UVIS F606W
    - • UVIS F621M
    - • UVIS F625W
    - • UVIS F631N
    - • UVIS F645N
    - • UVIS F656N
    - • UVIS F657N
    - • UVIS F658N
    - • UVIS F665N
    - • UVIS F673N
    - • UVIS F680N
    - • UVIS F689M
    - • UVIS F763M
    - • UVIS F775W
    - • UVIS F814W
    - • UVIS F845M
    - • UVIS F850LP
    - • UVIS F953N
    - • UVIS FQ232N
    - • UVIS FQ243N
    - • UVIS FQ378N
    - • UVIS FQ387N
    - • UVIS FQ422M
    - • UVIS FQ436N
    - • UVIS FQ437N
    - • UVIS FQ492N
    - • UVIS FQ508N
    - • UVIS FQ575N
    - • UVIS FQ619N
    - • UVIS FQ634N
    - • UVIS FQ672N
    - • UVIS FQ674N
    - • UVIS FQ727N
    - • UVIS FQ750N
    - • UVIS FQ889N
    - • UVIS FQ906N
    - • UVIS FQ924N
    - • UVIS FQ937N
    - • IR F098M
    - • IR F105W
    - • IR F110W
    - • IR F125W
    - • IR F126N
    - • IR F127M
    - • IR F128N
    - • IR F130N
    - • IR F132N
    - • IR F139M
    - • IR F140W
    - • IR F153M
    - • IR F160W
    - • IR F164N
    - • IR F167N
- Appendix B: Geometric Distortion
  - • B.1 Overview
  - • B.2 UVIS Channel
  - • B.3 IR Channel
- Appendix C: Dithering and Mosaicking
  - • C.1 Why Mosaicking and Dithering are Needed
  - • C.2 WFC3 Patterns
- Appendix D: Bright-Object Constraints and Image Persistence
  - • D.1 UVIS Channel
  - • D.2 IR Channel
- Appendix E: Reduction and Calibration of WFC3 Data
  - • E.1 Overview
  - • E.2 The STScI Reduction and Calibration Pipeline
  - • E.3 The SMOV Calibration Plan
  - • E.4 The Cycle 17 Calibration Plan
  - • E.5 The Cycle 18 Calibration Plan
  - • E.6 The Cycle 19 Calibration Plan
  - • E.7 The Cycle 20 Calibration Plan
  - • E.8 The Cycle 21 Calibration Plan
  - • E.9 The Cycle 22 Calibration Plan
  - • E.10 The Cycle 23 Calibration Plan
  - • E.11 The Cycle 24 Calibration Plan
  - • E.12 The Cycle 25 Calibration Plan
  - • E.13 The Cycle 26 Calibration Plan
  - • E.14 The Cycle 27 Calibration Plan
  - • E.15 The Cycle 28 Calibration Plan
  - • E.16 The Cycle 29 Calibration Plan
  - • E.17 The Cycle 30 Calibration Plan
  - • E.18 The Cycle 31 Calibration Plan
  - • E.19 The Cycle 32 Calibration Plan
- • Glossary

E.10 The Cycle 23 Calibration Plan

On this Page