E.9 The Cycle 22 Calibration Plan

The Cycle 22 calibration plan is summarized in WFC3 ISR 2015-07. It was executed from November 2014 through October 2015.

The calibration programs comprising this plan are listed in Table E.10. The proposals and observation dates can be viewed by entering the Proposal ID into the HST Program Information webpage.

The Cycle 22 calibration plan was designed to:

maintain and update the standard reference files (biases, darks, linearity CTE traps, UVIS anomalous QE pixels)
monitor the health of the instrument (throughput, gain, hysteresis, bad/hot pixels, wavelength and flux stability of grisms; filter transmission, number of IR blobs, CTE decline, stability of the post-flash LED, state of the CSM)
improve astrometric precision (in narrow and medium band filters, and with spatial scan)
improve the characterization of persistence in IR observations

The results of these calibration programs will be documented in Instrument Science Reports on the WFC3 website at:
http://www.stsci.edu/hst/instrumentation/wfc3/documentation/instrument-science-reports-isrs

Table E.10: Cycle 22 Calibration Programs

Proposal ID	Title
14000	UVIS Anneal
14001	UVIS Bowtie Monitor
14002	UVIS Daily Monitor A
14003	UVIS Daily Monitor B
14004	UVIS Daily Monitor C
14005	UVIS Unflashed Monitor
14006	UVIS Post-Flash Monitor
14007	UVIS CCD Gain Stability
14008	IR Dark Monitor
14009	IR Linearity Monitor
14010	IR Gain Monitor
14011	UVIS CTI Monitor (EPER)
14012	UVIS CTE Monitor (Star cluster)
14013	UVIS CTE in subarrays
14014	UVIS Traps with CI
14015	Refining IR Persistence Model
14016	Short term IR Persistence
14017	Persistence after Worst Actors
14018	UVIS Contam Monitor
14019	UVIS Shutter Characterization
14020	Photometric Repeatability
14021	UVIS & IR Photometry Zero Points
14022	IR Observations of Red CALSPEC Stars
14023	IR Grism wavelength Calibration stability
14024	IR Grisms flux and trace calibration stability
14025	UVIS Grism wavelength Calibration stability
14026	UVIS Grisms flux and trace calibration stability
14027	UVIS Pixel variations via int-flat monitor
14028	UVIS Internal Flats
14029	IR Internal Flats
14030	CSM monitor Earth Flats
14031	Astrometric Validation of UVIS Filters
13929	High precision calibration of UVIS Geometric distortion

«Previous Next»

WFC3 Instrument Handbook
- • Acknowledgments
- Chapter 1: Introduction to WFC3
  - • 1.1 New for Cycle 33
  - • 1.2. Overview
  - • 1.3 Key Features of WFC3
  - • 1.4 WFC3 Quick Reference Guide
  - • 1.5 Special Considerations for Cycle 33
  - • 1.6 Sources of Further Information
  - • 1.7 The WFC3 Instrument Team at STScI
- Chapter 2: WFC3 Instrument Description
- Chapter 3: Choosing the Optimum HST Instrument
- Chapter 4: Designing a Phase I WFC3 Proposal
  - • 4.1 Phase I and Phase II Proposals
  - • 4.2 Preparing a Phase I Proposal
- Chapter 5: WFC3 Detector Characteristics and Performance
- Chapter 6: UVIS Imaging with WFC3
  - • 6.1 WFC3 UVIS Imaging
  - • 6.2 Specifying a UVIS Observation
  - • 6.3 UVIS Channel Characteristics
  - • 6.4 UVIS Field Geometry
  - • 6.5 UVIS Spectral Elements
  - • 6.6 UVIS Optical Performance
  - • 6.7 UVIS Exposure and Readout
  - • 6.8 UVIS Sensitivity
  - • 6.9 Charge Transfer Efficiency
  - • 6.10 Other Considerations for UVIS Imaging
  - • 6.11 UVIS Observing Strategies
- Chapter 7: IR Imaging with WFC3
  - • 7.1 WFC3 IR Imaging
  - • 7.2 Specifying an IR Observation
  - • 7.3 IR Channel Characteristics
  - • 7.4 IR Field Geometry
  - • 7.5 IR Spectral Elements
  - • 7.6 IR Optical Performance
  - • 7.7 IR Exposure and Readout
  - • 7.8 IR Sensitivity
  - • 7.9 Other Considerations for IR Imaging
  - • 7.10 IR Observing Strategies
- Chapter 8: Slitless Spectroscopy with WFC3
- Chapter 9: WFC3 Exposure-Time Calculation
  - • 9.1 Overview
  - • 9.2 The WFC3 Exposure Time Calculator - ETC
  - • 9.3 Calculating Sensitivities from Tabulated Data
  - • 9.4 Count Rates: Imaging
  - • 9.5 Count Rates: Slitless Spectroscopy
  - • 9.6 Estimating Exposure Times
  - • 9.7 Sky Background
  - • 9.8 Interstellar Extinction
  - • 9.9 Exposure-Time Calculation Examples
- Chapter 10: Overheads and Orbit Time Determinations
  - • 10.1 Overview
  - • 10.2 Observatory Overheads
  - • 10.3 Instrument Overheads
  - • 10.4 Orbit Use Examples
- Appendix A: WFC3 Filter Throughputs
  - • A.1 Introduction
  - A.2 Throughputs and Signal-to-Noise Ratio Data
    - • UVIS F200LP
    - • UVIS F218W
    - • UVIS F225W
    - • UVIS F275W
    - • UVIS F280N
    - • UVIS F300X
    - • UVIS F336W
    - • UVIS F343N
    - • UVIS F350LP
    - • UVIS F373N
    - • UVIS F390M
    - • UVIS F390W
    - • UVIS F395N
    - • UVIS F410M
    - • UVIS F438W
    - • UVIS F467M
    - • UVIS F469N
    - • UVIS F475W
    - • UVIS F475X
    - • UVIS F487N
    - • UVIS F502N
    - • UVIS F547M
    - • UVIS F555W
    - • UVIS F600LP
    - • UVIS F606W
    - • UVIS F621M
    - • UVIS F625W
    - • UVIS F631N
    - • UVIS F645N
    - • UVIS F656N
    - • UVIS F657N
    - • UVIS F658N
    - • UVIS F665N
    - • UVIS F673N
    - • UVIS F680N
    - • UVIS F689M
    - • UVIS F763M
    - • UVIS F775W
    - • UVIS F814W
    - • UVIS F845M
    - • UVIS F850LP
    - • UVIS F953N
    - • UVIS FQ232N
    - • UVIS FQ243N
    - • UVIS FQ378N
    - • UVIS FQ387N
    - • UVIS FQ422M
    - • UVIS FQ436N
    - • UVIS FQ437N
    - • UVIS FQ492N
    - • UVIS FQ508N
    - • UVIS FQ575N
    - • UVIS FQ619N
    - • UVIS FQ634N
    - • UVIS FQ672N
    - • UVIS FQ674N
    - • UVIS FQ727N
    - • UVIS FQ750N
    - • UVIS FQ889N
    - • UVIS FQ906N
    - • UVIS FQ924N
    - • UVIS FQ937N
    - • IR F098M
    - • IR F105W
    - • IR F110W
    - • IR F125W
    - • IR F126N
    - • IR F127M
    - • IR F128N
    - • IR F130N
    - • IR F132N
    - • IR F139M
    - • IR F140W
    - • IR F153M
    - • IR F160W
    - • IR F164N
    - • IR F167N
- Appendix B: Geometric Distortion
  - • B.1 Overview
  - • B.2 UVIS Channel
  - • B.3 IR Channel
- Appendix C: Dithering and Mosaicking
  - • C.1 Why Mosaicking and Dithering are Needed
  - • C.2 WFC3 Patterns
- Appendix D: Bright-Object Constraints and Image Persistence
  - • D.1 UVIS Channel
  - • D.2 IR Channel
- Appendix E: Reduction and Calibration of WFC3 Data
  - • E.1 Overview
  - • E.2 The STScI Reduction and Calibration Pipeline
  - • E.3 The SMOV Calibration Plan
  - • E.4 The Cycle 17 Calibration Plan
  - • E.5 The Cycle 18 Calibration Plan
  - • E.6 The Cycle 19 Calibration Plan
  - • E.7 The Cycle 20 Calibration Plan
  - • E.8 The Cycle 21 Calibration Plan
  - • E.9 The Cycle 22 Calibration Plan
  - • E.10 The Cycle 23 Calibration Plan
  - • E.11 The Cycle 24 Calibration Plan
  - • E.12 The Cycle 25 Calibration Plan
  - • E.13 The Cycle 26 Calibration Plan
  - • E.14 The Cycle 27 Calibration Plan
  - • E.15 The Cycle 28 Calibration Plan
  - • E.16 The Cycle 29 Calibration Plan
  - • E.17 The Cycle 30 Calibration Plan
  - • E.18 The Cycle 31 Calibration Plan
  - • E.19 The Cycle 32 Calibration Plan
- • Glossary

E.9 The Cycle 22 Calibration Plan

On this Page